GearTrax2010中文破解版 32位/64位通用版
- 軟件類型：
- 國產軟件
- 軟件語言：
- 簡體中文
- 軟件大�。�
- 9.7 MB
- 軟件授權：
- 免費軟件
- 軟件評級：
- 4
- 更新時間：
- 2016-06-17
- 應用平臺：
- WinXP, Win7, WinAll
GearTrax201032位/64位通用版（含破解，漢化) 本人試用了，在論壇上報告過有誤報情況 注意 solidwork 需要到 工具->選項中勾上"英文特征"和"英文菜單"并重啟后才可以正常建模.
![\"GearTrax2010](\"/d/file/p/2016-06-17/6f013e625c0ffce30e95b0c32fbfefae.jpg\")
GearTrax2010漢化版破解說明
1) Install any of Camnetics2010 programs: CamTrax2010， GearTrax2010， GearTeq2010
此Crack支持以下幾個軟件：
CAMTrax 2010
CAMTraxMFG 2010
GearTrax 2010
GearTeq 2010
安裝以上任意軟件后，按下列對應說明破解��！
9cax.com
2) For CamTrax2010
Run this patch， browse to <CamTrax2010 program directory>， select "CamTrax2010.dll" and click "Start > OK"
Run this patch， browse to <CamTrax2010 program directory>， select "CamTrax2010.exe" and click "Start > OK"
3) For CAMTrax MFG (Standalone) 2010
Run this patch， browse to <CamTraxMFG program directory>， select "CamTraxMFG.exe" and click "Start > OK"
4) For CearTrax2010
Run this patch， browse to <GearTrax2010 program directory>， select "GearTrax2010.dll" and click "Start > OK"
Run this patch， browse to <GearTrax2010 program directory>， select "GearTrax2010.exe" and click "Start > OK"
5) For GearTeq2010
Run a program， Select "Full License"， Select "Use a SolidWorks Serial"
Input a GearTeq2010 RegCode witch corresponds to your SW Serial
SW Serial GearTeq2009 RegCode
0101 0000 1289 1488 -> IpMK KUKS SKWA
0001 0001 0736 0361 -> 2QQC 6W6I QC86
9916 5719 6888 1432 -> fQOl bflh fKdd
That\'a all.. Enjoy :)
Cracked by TuPis
P.S.
1) You can run CamTrax2010 and GearTrax2010 from Start > All Programs > Camnetics >...
2) Also you can add CamTrax2010 and GearTrax2010 to SW add-in.
To make it:
Start SW
Click "Open" > Select "File type" to be opened- SW add-in (*.dll) > browse to <CamTrax2010 program directory>\\CamTrax2010.dll > OK
Click "Open" > Select "File type" to be opened- SW add-in (*.dll) > browse to <GearTrax2010 program directory>\\GearTrax2010.dll > OK
After that a "Camnetics" drop-down menu will appear in you SolidWorks Main Menu